Skip to main content

BIGAB 17-20

Art.no 700206

BIGAB 17–20 is a new model with the same basic design as the 15-19 but which is fully equipped, most of the equipment being fitted as standard at the factory. 17-20 has a sprung 24 tonne tandem bogie, hydraulic load transfer cylinder to the tractor enabling improved load transfer during exchange, hydraulic control between tipping and exchange, electric control valve for the hydraulic functions (pressure and free return) with a control unit in the cab for convenient application of the functions. In addition, two doubleaction auxiliary functions can be added, as well as half front and rear mudguards. BIGAB 17-20 is the well equipped trailer that feels exactly right and which follows the tractor just as it should.

For further information about the equipment of this model or the possibilities of adding extra, please see the headline “Equipment”.

Adoption of national, regional or local requirements beyond CE- approval or equivalent is not the responsibility of the manufacturer. The technical data refer to a standard trailer. Be aware that local regulations might change the need of the technical specification of the trailer. Ask your dealer for more information. 

In case of crane mounting the max load will be decreased by the crane weight. Exact number depends on crane model.

Bogie type: Sprung pendulum bogie
Wheel dimension in standard 600/50-22,5
Required tractor hydraulics: 1 brake outlet, Electric control valve, pressure and free return
Oil volume: Minimum available oil volume, with full system (L) 19
Chassis weight: The final weight of the trailer depends on equipment (Kg) 4500
Chassis length (with drawbar) (mm) with standard drawbar 7500
Width across the wheels (mm) with standard equipment* 2630
Total weight: Country dependent
Max load including container (Kg) 17000
Max load during container exchange (Kg) 17000
Suitable container length (mm) 5 500 - 6 000
Load on tow eye: Depending in the position of the container (Kg) 2600-3500
Max tipping capacity (Kg) 17000
Max working pressure (MPa) 22.0
*Note! Dimensions might change depending of specific configuration

Trailer Valves

Brakes

Lights

Chassis parts

Tires

Traditional Cranes

Z-Cranes

Drawbar

Suspension

Safety

Containers

PTO Pump

Mudguards

Tool box

Do you need more information?

Tom Belton International salesman Phone: +44 7860 951485

Contact us

NAME *
PHONE *
EMAIL *
COUNTRY *
QUESTION *

+3726790000
Tule 30, 765 05 Saue, Estonia